IRDA Keyboard Touch Screen SMD Rework Station
The Rework Station must be managed of reworking with safety and exactly under that situation.Furthermore, the system operation should be easy and safety to the operator. Our rework Station will be best matching to the needs.
IRDA Keyboard Touch Screen SMD Rework Dtation
1. Product Features of IRDA keyboard touch screen smd rework station
1.High precision temperature thermocouple can feel the actual temperature precisely.
2. Suction force of the vacuum pump is adjustable, 360 degree rotation in. F. Angle , mounting nozzle is micro-adjustable.
3. Over-heating protection for the upper hot air heating head.
4. Large ir preheating from the bottom, made of imported heater, will heat the pcb evenly to avoid deformation and keep solder effect, heating board is independent controlled.
5. Equipped with different alloy hot air nozzles (customizable), easy to replace.
2.Specification of IRDA keyboard touch screen smd rework station
3.Details of IRDA keyboard touch screen smd rework station
1.HD Touch screen interface;
2.Three independent heaters ( hot air & infrared );
3. Vacuum pen;
4.Why Choose Our IRDA keyboard touch screen smd rework station?
5.Certificate of IRDA keyboard touch screen smd rework station
6.Packing & Shipment of IRDA keyboard touch screen smd rework station
Solder paste usage and related precautions
Solder paste must be stored in the refrigerator. The temperature is set to 0~10°C, and the solder paste stock is stored in the refrigerator at 0~10°C). Use according to the principle of FIFO. (According to the LOT number or manufacturer of solder paste. Manufacturing date). Guaranteed period of 90 days is used up. If not used, it will be scrapped.
The temperature inside the refrigerator needs to be tested four times a day, and the white nights are tested twice each (10:00 16:00 22:00 4:00) and the temperature curve needs to be done.
Paste must be taken out of the refrigerator in advance before use, and can be unpacked by leaving it in working environment (22~28°C) for 6 hours. Put it in solder paste mixer and stir evenly for 5 minutes, then use it for half an hour before use. ( Refer to solder paste mixer operation instruction book)
For the TED customer's request, the KEY IN serial number must first be used in the SFCS every time a new bottle of solder paste is used, in order to track the use of the solder paste.
For TED products, printing bit, ICT, PI bit, brush SFCS, you must tick the SUBLINE at the PCB collection station (YES CHECK Line, not this line of the board can not brush SFCS in this line)
Unopened solder paste after reheating, can be stored below 28°C for 7 days (Refer to Paste Stirring Specification) Abnormal FE Special Handling)
Solder paste PCB should be finished in 100 minutes
Kaifeng's solder paste has not been used for more than 24 hours for end-of-life disposal. When the solder paste is abnormal (eg: storage temperature, storage period is abnormal, the engineering unit must be notified of FE, viscosity test. The viscosity value is 320 ~ 392PA.S. Available) and fill in <Stencil Abnormal Condition Record> Viscosity Test Method Reference Viscometer Tester Instructions.