Optical Xbox360 Bga Rework Station
Optical Xbox360 BGA rework station Dinghua DH-A4D is A full automatic SMT/BGA rework machine featuring with carbon fiber heating tubes and glass-shield covering , high automatic optical CCD & chip feeder can run rightward/leftward or backward/frontward, and laser-point- built-in top hot head...
Optical Xbox360 BGA rework station
Dinghua DH-A4D is A full automatic SMT/BGA rework machine featuring with carbon fiber heating tubes and glass-shield covering , high automatic optical CCD & chip feeder can run rightward/leftward or backward/frontward, and laser-point- built-in top hot head can help for accurately positioned and so on.
The product parameter of optical Xbox360 BGA rework station
2nd 1200W, 3rd German IR heater 4200W
Double joysticks operation. Fully automatic positioning, soldering, cooling, integration..
Optical CCD camera lens
Automatic Frontward / backward, right / left, or manual by joysticks, imported from Panasonnic
Full automatic, application for chip 1*1~80*80mm
10x - 220x
±15mm forward/backward, ±15mm right/left
Laser position, fast and accurate position of pcb and bga
BGA chip angle adjusting
Top air flow speed
adjusted by adjusting knob, prevent tiny bga from being moved
Intelligent positioning, PCB can be adjusted in X, Y direction with “5 points support” + V-groove pcb bracket + universal fixtures, spring installing on PCB workbench, protecting PCB from being deformed .
K sensor, close loop
PLC control, Servo driver
Taiwan led working light, any angle adjustable
Temperature profile storage
Max 410×450 mm Min 22×22 mm
2x2 - 80x80 mm
Minimum chip spacing
External temper sensor
Product details of optical Xbox360 BGA rework station
Optical CCD & chip feeder, they work together for PCB imaging and chip convery for desoldering or soldering, especially when the positing is set on touch screen, the top head will automatically find the chip’s location.
There are 3 micrometers in total, one is at top head for chip angle adjusting, max 60°， the other two ones for PCB positioning moved +/- 15 mm， to make PCB workbench leftward/rightward or backward/frontward, accurate 0.01mm.
Thermocouple, 4 pcs available, for real- temperature detected, and if necessary, some temperature can be calibrated .
IR preheating area covered by anti high temperature glass-shield, which can prevent any small components or dust from dropping inside.
Also, the whole IR area can be moved to left or right max 10 cm for chip position heated.
Spring on PCB workbench, it can make PCB protected when heating up .
SMT/BGA rework station DH-A4D, L*W*H=670*530*790mm, packed in plywood box with foam inside for machine protected, no matter it will be shipped to Euro, the USA or any country, it is approved.
The shipping, packing and sales-after of optical XBOX360 BGA rework station
Machines like this one DH-A4D will be vibrated for at least 24 hours before delivery, the we are the only one who do vibration for BGA rework station, after that, let it run constantly at least 12 hours.
Packed in plywood box(fumigated), no matter where it will be shipped, there is no limitation for
The valuable customers who are using our machine
This is a vibration testing machine, we are the first one using it for our BGA rework station testing before delivery, and we found we also the only one using it sa for in these years in China.
After vibrating, machine will be tested again, to make sure if there is any problem occured.
2 years warranty for whole machine, 3 years for heaters, whole life for technical support.
Customers that cooperated with us for optical Xbox360 BGA rework station
The FAQ of optical Xbox360 BGA rework station
Q:How to operate our machines?
A:We’ll offer user manual and operation videos to our customer accordingly, if customer come to our company, we could show it step by step, it takes about 2-3 hours for a new user to master this skills.
Q.How about our after-sale service?
A:In general, three years warranty for heater wires, 2 years for the whole machine, life-long for technical support.
Q: How many days can we get the machines? How many delivery ways can we choose?
A: We can ship the machines within 2-3 days after the full payment but the specific time is decided by the exact shipping way you chose.
3-7 days by DHL, Fedex, UPS,etc (Door to Door Service)
3-5 days by Air to your airport (Door to Airport Service )
25-35 days by Sea to the seaport(Port to Port Service)
Q: How about the package ? Is it safe during the delivery ?
A:All BGA rework machines are well packed by standard strong wooden carton with foam inside.
Know-how about BGA rework station:
Hot Air and IR are the two main types of rework stations used by OEMs and PCB contract manufacturers today. Both have advantages and disadvantages and choosing the right one for your application requires a careful consideration of a number of factors, including your budget, your working requirements and the capabilities of your staff. On this page, we outline some of the differences between hot air and IR BGA rework stations. Have a question or need assistance determining which is right for you? The Precision PCB Services, Inc. team would be happy to help. Give us a call or send an email to contact a representative directly.