Optical VGA Card Bga Rework Station
Optical VGA card BGA rework station Full automatic hybrid-rework system for IC ,CSP, BGA, sockets, connectors, etc. with additional functions chip feeder and air gas adjusting . Designed and optimized for rework of both small and large size PCB. Clear vision and chip feeder , vision system...
Optical VGA card BGA rework station
Full automatic hybrid-rework system for IC ,CSP, BGA, sockets, connectors, etc. with additional functions chip feeder and air gas adjusting . Designed and optimized for rework of both small and large size PCB.
Clear vision and chip feeder, vision system displays HD quality images for precise alignment. High-quality optical systems are available for a wide range of applications from μSMDs to large components.Both optical CCD lens and chip feeder are automatic, and the chip feeder are available for chip with size from 1*1~ 55*55 mm, if necessary, it can be added to 1*1~80*80mm.
5 pcs temperature thermocouple, there are 5 points temperatures can be tested at the same time for better comparison.Sure, if the PCB dug a hole, the end of temperature wire can be inserted and covered for the motherboard inside temperature testing.
Infrared preheating area Using the advantages of both convection and infrared technologies, energy is transferred efficiently with uniform heat distribution across the PCB. Controlled heating and cooling of small and large mass assemblies, minimize temperature induced stresses and preheat products for optimized soldering.
Anti high temperature glass-shield preventing any small components and dust from dropping inside, better protection for technician and durable.
PCB fixing on bottom IR and lower hot air, there is two beams with fours screws, 6 fixtures, 2 pieces of V-groove for any shape or size to me quickly fixed.
2 micrometers , for motherboard fine-tune to left/right and rear/front, max: -/+ 15 mm.
Computer, for temperature and time and other parameters input, all of temperature profiles can be saved for use again, especially, curve analysis and programmed air gas
Adjusting are convenient for new PCB and micro chip repaired .
The customers who have been using our BGA rework stations
The shipping and warranty of optical VGA card BGA rework station
There are DHL, Fedex,TNT, and Air, land transportation and sea shipping, usually, depends on you, but we will suggest you which way is cost-effective.
3 years warranty for heaters( including IR bricks), 2 years warranty for whole machine(DH-A5), providing manual book and CD with machine for customers, and free technical support for long-life .
FAQ of optical VGA card BGA rework station
Q: If we come to your factory, you will provide the free training ?
A: Yes, warmly welcome you to visit our factory, we will arrange the free training for you.
Q: How long is your delivery time?
A: Generally it is 2~3 days if the goods are in stock.It would be around 5~20 days if the goods are not in stock, delivery time is based on quantity.
Q: Do you have MOQ ? Can I buy one set only?
A: 1 set machine is available.
Q:If we come to your factory, do you provide the free training ?
A:Yes, warmly welcome to visit our factory, we will arrange the free training for you.
Know-how about BGA rework station
The Dinghua DH-A5 is an all-round hot air rework station for electronic components and assemblies.
The complete rework cycle, including desoldering and soldering the component, residual solder removal and reballing, can be performed on the same compact rework system. The spectrum of compatible surface-mount devices ranges from very small (0204) to large components (BGA).
The full-area Bottom Heating Module has been optimized for reworking medium sized PCB of consumer electronics (tablets, laptops, gaming consoles) or medical technology products